Signal Receiver
Block blockname: Wireless Signal Receiver poweredby: Wireless Signal image: Signal_Receiver type: Single
Remote Signal Receiver is used to receive wireless
electrical signal transmitted by Signal
Transmitter or Wireless
Button. To proper work you need to set specified
channel which the Receiver will work on.
Signal Receiver has indicator light which determines connection status.
It has menu where you can set work mode. The receiver has three work
modes - biggest value, smallest value or toggle.
\
When you use multiple wireless signal sources which have different
signal values, the receiver set in this mode will receive only the
biggest one.
In this example both Signal Transmitters are
working on the same channel.
Receiver A is set in Biggest value mode and it's receiving 75%
signal.
Receiver B is set in Smallest value mode and it's receiving 25%
signal. 
\
When you use multiple wireless signal sources which have different
signal values, the receiver set in this mode will receive only the
smallest one.
It works as shown in example above.
In this mode the receiver will react as a switch. To switch it's state
you have to deliver only short pulse of signal from, for example,
Wireless Button.
You can use this mode to control one Relay by multiple
Wireless Buttons.
Crafting Grid
| Slot 1 | Slot 2 | Slot 3 |
|---|---|---|
| Signal_Antenna | ||
| Iron_Ingot | Cheap_Chip | Iron_Ingot |
- Result: Signal_Receiver
- Quantity: 1
Category: Category: Blocks Category: Signal