Leviosa WiFi Zone Bridge Integration for Home Assistant

This integration uses Leviosa's original Home Assistant custom component implementation to make Leviosa's WiFi Zone bridge and associated shades available for use with Home Assistant.

Installation

Option 1: Install via HACS (Recommended)

1. Make sure you have HACS installed

2. Click the button below to add this repository to HACS:

   

   Or manually add it:

   • In HACS, click on "Integrations"
   • Click the three dots menu in the top right corner
   • Select "Custom repositories"
   • Add https://github.com/alfredcrager/LeviosaBridgeHomeAssistant as an Integration
   • Click "Add"

3. Search for "Leviosa Motor Shades" in HACS and install it

4. Restart Home Assistant

5. Add the Leviosa integration through "Devices & services" under "Settings"

Option 2: Manual Installation

This component is an integration, which is different from an add on. Integrations are managed through the "Devices & Services" configuration menu rather than through "Add-ons, Backups & Supervisor".

Install this integration manually by cloning this repository and copying the integration files to the proper location in your HA config directory.

Clone this repository and copy the custom_components/leviosa_shades folder into your <config>/custom_components/ directory (so you end up with <config>/custom_components/leviosa_shades).

Restart Home Assistant after installation.

Add the Leviosa integration through "Devices & services" under "Settings" in Home Assistant