Windows Driver and Control Center v1.9

Windows prerelease for the OCP Time Card driver and Control Center.

Control Center

• Live PHC, GNSS, atomic clock, UART/NMEA, SMA, I2C, subsystem, and diagnostics workspaces
• Guarded synchronization from Windows to the Time Card PHC and from the PHC back to Windows
• State-aware subsystem navigation, including the monochrome SMA connector icon
• Administrator elevation for direct hardware access

Full hardware controls require the Windows Time Card driver v1.9 (ABI 4). The reverse clock-sync control rejects implausible PHC dates such as an uninitialized 1970 clock and always asks for confirmation.

Source commit: 72168986dfef7df37034305d9d976324bf5ed4b6
SHA-256 (TimeCardControlCenter.exe): 2E586891D0BF2BDFEE5CFF697CE54AE1E8D589AEE954221DCB66E3D27A843B5F

TimeCard V28

Updated all NTL Closed source IP Cores to latest version including updated documentation.
Added new UCM version which supports the new features in case you have an UART/USB connection to the Time Card.

Main changes:
-ESIP Message support for Furuno GNSS receivers
-NMEA UTC Message support (supported by ComNav K801 and u-blox F9T)

TimeCard LitePCIe with PTM V31

Updated all NTL Closed source IP Cores to latest version including updated documentation.
Added new UCM version which supports the new features in case you have an UART/USB connection to the Time Card.

Main changes:
-ESIP Message support for Furuno GNSS receivers
-NMEA UTC Message support (supported by ComNav K801 and u-blox F9T)

Production TimeCard V14

Updated all NTL Closed source IP Cores to latest version including updated documentation.

Main changes:
-ESIP Message support for Furuno GNSS receivers
-NMEA UTC Message support (supported by ComNav K801 and u-blox F9T)

Production TimeCard LitePCIe with PTM V15

Updated all NTL Closed source IP Cores to latest version including updated documentation.

Main changes:
-ESIP Message support for Furuno GNSS receivers
-NMEA UTC Message support (supported by ComNav K801 and u-blox F9T)

Production TimeCard V12

Updated all NTL Closed source IP Cores to latest version including updated documentation.

Main changes:
-Clock with Fractional Support
-Small bugfix with Beidou as time source in the TOD Slave
-other different small improvements and adaptations

TimeCard V27

Updated all NTL Closed source IP Cores to latest version including updated documentation.
Added new UCM version which supports the new features in case you have an UART/USB connection to the Time Card

Main changes:
-Clock with Fractional Support
-Small bugfix with Beidou as time source in the TOD Slave
-other different small improvements and adaptations

Production TimeCard V11

Updated all NTL Closed source IP Cores to latest version

Main changes:
-Added GNSS Status information to the TOD Slave (for details please check the register set)
-Added TSIPv1 messages support to the TOD Slave (for details please check the register set)

Other changes:
-Setup of the Conf Master for the startup configuration via txt file (no functional impact)
-Setup of the Conf Slave for the configuration with UCM via txt file (no functional impact)

TimeCard V26

Updated all NTL Closed source IP Cores to latest version including updated documentation.
Added new UCM version which supports the new features in case you have an UART/USB connection to the Time Card

Main changes:
-Added GNSS Status information to the TOD Slave (for details please check the register set)
-Added TSIPv1 messages support to the TOD Slave (for details please check the register set)

Other changes:
-Setup of the Conf Master for the startup configuration via txt file (no functional impact)
-Setup of the Conf Slave for the configuration with UCM via txt file (no functional impact)

TimeCard V25

Added SMA input status supervision via AXI GPIO SMA STATUS (Base: 0x0014_2000)
Prepared for I2C communication towards clock which can be selected via AXI GPIO EXT (Bit 31)
Added Binary File with special header for field upgrade