This is 3D printable Minidox Case. This is forked from dotdash32's acrylic case.
This is made of Lower-Middle, Top-Plate and High-Profile. You need Lower-Middle and Top-Plate, but High-Profile is optional.
| Item | number | remarks |
|---|---|---|
| M2x25 screw | 16 | Only with High-Profile |
| M2x17 screw | 16 | Only without High-Profile |
| M2 nut | 16 |
- Top-Plate is printed upside-down.
Using 3 holes outside of Lower-Middle Case, You can tent the case. Extra staff you need is below.
| Item | number | remarks |
|---|---|---|
| M6 tap | 1 | |
| M6x40 screw | 6 | Adjust length as you like |
| M6 butterfly nut | 6 |