asm2464pd-firmware/flash.py at master · tinygrad/asm2464pd-firmware · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
#!/usr/bin/env python3

import sys
import struct

from tinygrad.helpers import getenv
from tinygrad.runtime.support.usb import USB3

SUPPORTED_CONTROLLERS = [
  (0x174C, 0x2464),
  (0x174C, 0x2463),
  (0xADD1, 0x0001),
]
if getenv("USBDEV", ""): SUPPORTED_CONTROLLERS.insert(0, (int(x, 16) for x in getenv("USBDEV", "").split(":")))

dev = None
for vendor, device in SUPPORTED_CONTROLLERS:
  try:
    dev = USB3(vendor, device, 0x81, 0x83, 0x02, 0x04, use_bot=True)
    break
  except RuntimeError: pass
if dev is None:
  raise RuntimeError('Could not open controller. You can set USBDEV environment variable to your device\'s vendor and device ID (e.g., USBDEV="174C:2464")')

with open(sys.argv[1], 'rb') as infile:
   fw = bytearray(infile.read())

part1 = fw[:0xff00]
part2 = fw[0xff00:]

config1 = bytes([
  0xFF, 0xFF, 0xFF, 0xFF, 0x41, 0x41, 0x41, 0x41, 0x42, 0x42, 0x42, 0x42, 0x30, 0x30, 0x36, 0x30,
  0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x74, 0x69, 0x6E, 0x79, 0xFF, 0xFF, 0xFF, 0xFF,
  0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
  0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x74, 0x69, 0x6E, 0x79,
  0xFF, 0xFF, 0xFF, 0xFF, 0x55, 0x53, 0x42, 0x20, 0x33, 0x2E, 0x32, 0x20, 0x50, 0x43, 0x49, 0x65,
  0x20, 0x54, 0x69, 0x6E, 0x79, 0x45, 0x6E, 0x63, 0x6C, 0x6F, 0x73, 0x75, 0x72, 0x65, 0xFF, 0xFF,
  0xFF, 0xFF, 0xFF, 0xFF, 0x54, 0x69, 0x6E, 0x79, 0x45, 0x6E, 0x63, 0x6C, 0x6F, 0x73, 0x75, 0x72,
  0x65, 0xFF, 0xFF, 0xFF, 0xD1, 0xAD, 0x01, 0x00, 0x00, 0x01, 0xCF, 0xFF, 0x02, 0xFF, 0x5A, 0x94])

config2 = bytes([
  0xFF, 0xFF, 0xFF, 0xFF, 0x47, 0x6F, 0x70, 0x6F, 0x64, 0x20, 0x47, 0x72, 0x6F, 0x75, 0x70, 0x20,
  0x4C, 0x69, 0x6D, 0x69, 0x74, 0x65, 0x64, 0x2E, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
  0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x55, 0x53, 0x42, 0x34,
  0x20, 0x4E, 0x56, 0x4D, 0x65, 0x20, 0x53, 0x53, 0x44, 0x20, 0x50, 0x72, 0x6F, 0x20, 0x45, 0x6E,
  0x63, 0x6C, 0x6F, 0x73, 0x75, 0x72, 0x65, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
  0xFF, 0xFF, 0xFF, 0xFF, 0x8C, 0xBF, 0xFF, 0x97, 0xC1, 0xF3, 0xFF, 0xFF, 0x01, 0x2D, 0x66, 0xD6,
  0x66, 0x06, 0x00, 0xC0, 0x87, 0x01, 0x5A, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xCA, 0x01, 0x66, 0xD6,
  0xE3, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0x01, 0x00, 0xA5, 0x67])

# config patch
cdb = struct.pack('>BBB12x', 0xe1, 0x50, 0x0)
dev.send_batch(cdbs=[cdb], odata=[config1])

cdb = struct.pack('>BBB12x', 0xe1, 0x50, 0x1)
dev.send_batch(cdbs=[cdb], odata=[config2])

cdb = struct.pack('>BBI', 0xe3, 0x50, len(part1))
dev.send_batch(cdbs=[cdb], odata=[part1])

cdb = struct.pack('>BBI', 0xe3, 0xd0, len(part2))
dev.send_batch(cdbs=[cdb], odata=[part2])

cdb = struct.pack('>BB13x', 0xe8, 0x51)
dev.send_batch(cdbs=[cdb])

print("done, you can disconnect the controller!")