First of all, thank you so much for creating this cartridge.
There seems to be an inconsistency between the schematic and the pcb.
When you update the pcb from the schematic KiCAD wants to reconnect (or rather invert) the pin connections from the solder jumper to U3.
It shows two messages:
Reconnect U3 pin 2 from /CART_A20 to Net-(JP1-Pad2).
Reconnect U3 pin 3 from Net-(JP1-Pad2) to /CART_A20.
So I was wondering which one is correct, the schematic or the pcb?
Thanks for your help
First of all, thank you so much for creating this cartridge.
There seems to be an inconsistency between the schematic and the pcb.
When you update the pcb from the schematic KiCAD wants to reconnect (or rather invert) the pin connections from the solder jumper to U3.
It shows two messages:
Reconnect U3 pin 2 from /CART_A20 to Net-(JP1-Pad2).
Reconnect U3 pin 3 from Net-(JP1-Pad2) to /CART_A20.
So I was wondering which one is correct, the schematic or the pcb?
Thanks for your help