Merge remote-tracking branch 'stable/linux-6.12.y' into rpi-6.12.y

Author: popcornmix

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 12
-SUBLEVEL = 64
+SUBLEVEL = 66
 EXTRAVERSION =
 NAME = Baby Opossum Posse
 

arch/alpha/include/uapi/asm/ioctls.h

@@ -23,10 +23,10 @@
 #define TCSETSW		_IOW('t', 21, struct termios)
 #define TCSETSF		_IOW('t', 22, struct termios)
 
-#define TCGETA		_IOR('t', 23, struct termio)
-#define TCSETA		_IOW('t', 24, struct termio)
-#define TCSETAW		_IOW('t', 25, struct termio)
-#define TCSETAF		_IOW('t', 28, struct termio)
+#define TCGETA          0x40127417
+#define TCSETA          0x80127418
+#define TCSETAW         0x80127419
+#define TCSETAF         0x8012741c
 
 #define TCSBRK		_IO('t', 29)
 #define TCXONC		_IO('t', 30)

arch/arm/Kconfig

@@ -1229,7 +1229,7 @@ config HIGHMEM
 
 config HIGHPTE
 	bool "Allocate 2nd-level pagetables from highmem" if EXPERT
-	depends on HIGHMEM
+	depends on HIGHMEM && !PREEMPT_RT
 	default y
 	help
 	  The VM uses one page of physical memory for each page table.

arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi

@@ -335,7 +335,7 @@
 		pinctrl-0 = <&pinctrl_rtc>;
 		reg = <0x32>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 

arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi

@@ -113,6 +113,7 @@
 		ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
 			compatible = "ethernet-phy-id0007.c110",
 				     "ethernet-phy-ieee802.3-c22";
+			clocks = <&clk IMX8MP_CLK_ENET_QOS>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy0>;

arch/arm64/boot/dts/freescale/imx8qm-mek.dts

@@ -132,6 +132,7 @@
 		regulator-max-microvolt = <3000000>;
 		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		off-on-delay-us = <4800>;
 	};
 
 	reg_fec2_supply: regulator-fec2-nvcc {

arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi

@@ -168,25 +168,25 @@
 
 &lpuart0 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+	dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>;
 	dma-names = "rx","tx";
 };
 
 &lpuart1 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+	dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>;
 	dma-names = "rx","tx";
 };
 
 &lpuart2 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 17 0 0>, <&edma2 16 0 1>;
+	dmas = <&edma2 16 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
 	dma-names = "rx","tx";
 };
 
 &lpuart3 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 19 0 0>, <&edma2 18 0 1>;
+	dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
 	dma-names = "rx","tx";
 };
 

arch/arm64/boot/dts/freescale/mba8mx.dtsi

@@ -186,7 +186,7 @@
 			reset-assert-us = <500000>;
 			reset-deassert-us = <500>;
 			interrupt-parent = <&expander2>;
-			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };

arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso

@@ -14,7 +14,7 @@
 };
 
 &main_pmx0 {
-	gpmc0_pins_default: gpmc0-pins-default {
+	gpmc0_pins_default: gpmc0-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x003c, PIN_INPUT, 0) /* (K19) GPMC0_AD0 */
 			AM62X_IOPAD(0x0040, PIN_INPUT, 0) /* (L19) GPMC0_AD1 */

arch/arm64/include/asm/suspend.h

@@ -2,7 +2,7 @@
 #ifndef __ASM_SUSPEND_H
 #define __ASM_SUSPEND_H
 
-#define NR_CTX_REGS 13
+#define NR_CTX_REGS 14
 #define NR_CALLEE_SAVED_REGS 12
 
 /*