mfx101555026 Needs Opolette Python Triggering Code

[lg345]

Current Behavior

The Opolette needs the diodes at 120 Hz or 60 Hz and the delay between the diodes and Q-switch cannot be too far apart.

Expected Behavior

We need to be able to set the delay of the Q-switch. Independent of the diodes without tripping the laser. This means both need to run off of a 120 Hz pacemaker - and we need an inhibit signal to prevent the Q-switch from firing when we don't want it to.

Suggested Solution

Programmatically, we need the code to adjust delays based on how many pulses back we need. For example if we want an 9ms delay then it is one pulse back +9-8.3ms plus accounting for some minimum EVR delays and "true" time zero. Then it needs to update the event sequencer to turn off the inhibit on the correct pulse.