Boot fails. #552
-
|
First I generated a Yocto image as described in the following link (here's my bitbake command for the image version info: MACHINE=mpfs-icicle-kit bitbake mchp-base-image-sdk): https://github.com/linux4microchip/meta-mchp/blob/scarthgap/meta-mchp-common/README.md Then I setup/connect the board and then upload the image as described in the following link: The boot then fails as described in the log below: [6.18393] HSS_E51_Banner(): PolarFire(R) SoC Hart Software Services (HSS) - version 0. [6.39658] HSS_E51_Banner(): incorporating OpenSBI - version 0.9 [6.51984] HSS_PrintBuildId(): Build ID: 603c08ce3fe5cb84828deaf1f6587d85c7c879a7
[6.85315] HSS_E51_Banner(): NOTICE: Running from L2 Scratchpad [6.92867] Device_Serial_Number_Init(): Serial Number:
[13.731892] RunStateMachine(): boot_service(u54_1) :: Error -> Idle
[13.764442] RunStateMachine(): boot_service(u54_2) :: Error -> Idle
[13.796992] RunStateMachine(): boot_service(u54_3) :: Error -> Idle
[13.829542] RunStateMachine(): boot_service(u54_4) :: Error -> Idle Does anyone know why this is happening? |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment
-
|
For future people reading this. Update your HSS: |
Beta Was this translation helpful? Give feedback.
For future people reading this. Update your HSS:
https://www.youtube.com/watch?v=McAt2-6cwd4