I2C issue using 2.0.0

[fmuntean]

After uploading the firmware to the board and reset it the i2C stops workign.

I have the feeling the bootloader could be wrong here as the board works fine if I upload the sample firmware.

See logs:

---

** MXChip - Microsoft IoT Developer Kit **

---

[380][OLED: .\az3166-driver\libraries\drivers\display\VGM128064\oled.c: 307] OLED_ERROR: no i2c device found!
You can 1. press Button A and reset to enter configuration mode.
2. press Button B and reset to enter AP mode.

[fmuntean]

from further testing seems to happen when the serial monitor is open while booting.

[github-actions]

This issue has no recent activities, please take a look and provide updates for it.