IP is locked.

[jinsanko]

To whom it concerns:
It looks like the IP is locked and I can not generate the HDL wrapper.

Thanks
Jinsan Ko

create_bd_cell: Time (s): cpu = 00:00:17 ; elapsed = 00:00:18 . Memory (MB): peak = 1665.562 ; gain = 524.281
WARNING: [IP_Flow 19-3374] An attempt to modify the value of disabled parameter 'MMCM_CLKFBOUT_MULT_F' from '12.000' to '24.000' has been ignored for IP 'clk_wiz_1'
WARNING: [IP_Flow 19-3374] An attempt to modify the value of disabled parameter 'MMCM_CLKIN1_PERIOD' from '10.000' to '20.002' has been ignored for IP 'clk_wiz_1'
WARNING: [IP_Flow 19-3374] An attempt to modify the value of disabled parameter 'MMCM_CLKIN2_PERIOD' from '10.000' to '10.0' has been ignored for IP 'clk_wiz_1'
INFO: [Device 21-403] Loading part xczu9eg-ffvb1156-2-e
WARNING: [IP_Flow 19-2162] IP 'design_1_mipi_csi2_rx_subsystem_0_0' is locked:

• IP 'design_1_mipi_csi2_rx_subsystem_0_0' requires one or more mandatory licenses but no valid licenses were found. However license checkpoints may prevent use of this IP in some tool flows.
  Please select 'Report IP Status' from the 'Tools/Report' menu or run Tcl command 'report_ip_status' for more information.
  create_bd_cell: Time (s): cpu = 00:00:09 ; elapsed = 00:00:11 . Memory (MB): peak = 1833.113 ; gain = 146.922
  ERROR: [BD 41-542] Parameter cannot be set on a locked block. The block 'mipi_csi2_rx_subsystem_0' is locked, because: * IP 'design_1_mipi_csi2_rx_subsystem_0_0' requires one or more mandatory licenses but no valid licenses were found. However license checkpoints may prevent use of this IP in some tool flows.
  Please select 'Report IP Status' from the 'Tools/Report' menu or run Tcl command 'report_ip_status' for more information.
  INFO: [Common 17-17] undo 'set_property'
  ERROR: [Common 17-39] 'set_property' failed due to earlier errors.