Warning: cluster support not available.

[atv-axiomatic]

I've done the basic setup:
WITH_CLUSTER:=yes

In mosquito.conf:

node_name node1
node_address :

However this error still shows: Warning:cluster support not available.

And it's reading the node_address as a bridge address.
Not sure what to do.

Chinese translation:
我已经完成了基本设置：
WITH_CLUSTER：=是

在mosquito.conf中：

node_name node1
node_address <IP地址>：<端口>

但是，此错误仍然显示：
警告：群集支持不可用。

并且它正在读取node_address作为桥接地址。 不知道该怎么办。

[hui6075]

It is impossible, could you confirm that your are using the proper mosquitto binary image with re-make install after edit confg.mk for WITH_CLUSTER:=yes and WITH_BRIDGE:=no?

[atv-axiomatic]

How do I check if I'm using the correct mosquitto binary image?

[atv-axiomatic]

@hui6075 so I've configured the cmake_install to directly configure the "brew mosquitto" as well as the mosquitto from direct install and both ways it shows "warning cluster not supported" when running the binary image.

[atv-axiomatic]

@hui6075 I believe the issue is that somehow the config.mk file isn't being associated with the corresponding binary image file that I'm running.

Do you have any idea how to fix this?

[hui6075]

@CeruleanSource try:
make clean && make && make install

[atv-axiomatic]

@hui6075 doesn't work unfortunately.

The changes I make to config.mk don't seem to be read by anything. I'm using cmake and I'm on mac. Any suggestions?

[atv-axiomatic]

@hui6075 src/CMakeLists.txt does not contain an option to include cluster.c. Could this be the problem?

Thank you for your help!

[zzq0341]

Have you solved it? Under Mac, we encounter the same problem

[atv-axiomatic]

@zzq0341 The problem is that @hui6075 did not create a configuration for operating systems running Windows and Mac. Given this, I simply dual booted linux (specifically ubuntu) on my computer and ran the cluster on there which worked.

I did attempt to create a cluster configuration for Mac however the code seemed to get stuck in several places, for instance in loop.c where EPOLLOUT was not defined, etc. and I deemed that it would be a lot easier to just run this project on a linux system.

Let me know if this helps.

[zzq0341]

@CeruleanSource Thank you very much. I'll try it on Linux.