niri msg outputs
Output "BOE 0x0C34 Unknown" (eDP-1)
Current mode: 1920x1080 @ 60.003 Hz (preferred)
Variable refresh rate: supported, disabled
Physical size: 380x220 mm
Logical position: 0, 0
Logical size: 1920x1080
Scale: 1
Transform: normal
Available modes:
1920x1080@60.003 (current, preferred)
Output "Philips Consumer Electronics Company PHL 243V7 UK02348055420" (HDMI-A-1)
Current mode: 1920x1080 @ 60.000 Hz (preferred)
Variable refresh rate: not supported
Physical size: 530x300 mm
Logical position: 1920, 0
Logical size: 1920x1080
Scale: 1
Transform: normal
Available modes:
1920x1080@60.000 (current, preferred)
Using LXQt with lockme set as locker and lock before suspend.
With this setup it works from cli or shortcut, but when I close the lid to suspend and reopen it I've the matrix rain on the laptop and a reddish (maybe the niri red screen) on the external monitor. The same state can be triggered by disconnecting or reconnecting the monitor while the rain is active/locked.
Needs reboot from tty to reuse the machine.
PS: this works/worked: 2b58d96
Using LXQt with lockme set as locker and lock before suspend.
With this setup it works from cli or shortcut, but when I close the lid to suspend and reopen it I've the matrix rain on the laptop and a reddish (maybe the niri red screen) on the external monitor. The same state can be triggered by disconnecting or reconnecting the monitor while the rain is active/locked.
Needs reboot from tty to reuse the machine.
PS: this works/worked: 2b58d96