application wont open because the fonts arent in the application folder

[namalahideaway]

I cant open the application when it is installed. It says the fonts arent in the application folder.

[boy1dr]

this version of 3D Writer doesn't install. the fonts should be right there in the release folder as pictured.

[boy1dr]

If you don't need the laser functionality you can just use the online version https://3dwriter.io

[namalahideaway]

Thanks for the quick response. The online version has some strange issue where the print head in cura is so far away from the printer bed. So I was hoping to get the applicatoin working to get it solved or so if the software worked different. I am using a Bibo 3d printer and Cura slicer. When I need to set the pen offset to -150, 100 to get it to even be close to centered on my print surface.

…

On Fri, Sep 3, 2021 at 1:31 AM Chris Mitchell ***@***.***> wrote: If you don't need the laser functionality you can just use the online version https://3dwriter.io — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#26 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/APYYL7UTRRRTIUO3EXJGUVTUAACMPANCNFSM5DIYSLMQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.

-- Thanks, John Kubik

[boy1dr]

I'm not sure why it would do that. it might be an issue with homing. i haven't tried this software on your style of printer where the build plate moves.
With the online version click the blue button "Hardware setup".
Set the pen Up & Down values to suit your printer.

The easiest way to get the heights is to manually control your machine using the touchscreen/jog wheel until the pen is where you need it. Then use the Z heights shown on the display in the Up & Down value.

[namalahideaway]

I tried the hardware setup and I had to do stuff that didnt seem correct. I am home in a few hours and can try document what I am doing and see if there is a way forward. I buit a pen holder for my Bibo and that hard part is getting the gcode correct.

…

On Fri, Sep 3, 2021 at 8:48 AM Chris Mitchell ***@***.***> wrote: I'm not sure why it would do that. it might be an issue with homing. i haven't tried this software on your style of printer where the build plate moves. With the online version click the blue button "Hardware setup". Set the pen Up & Down values to suit your printer. The easiest way to get the heights is to manually control your machine using the touchscreen/jog wheel until the pen is where you need it. Then use the Z heights shown on the display in the Up & Down value. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#26 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/APYYL7UYZ45EAXDHJJ5CO7TUABVVPANCNFSM5DIYSLMQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.

-- Thanks, John Kubik