do post-installation proecudres as part of 'make install'

[dseomn]

The README currently has a section dedicated to post-installation procedures that boils down to this:

for d in \
    "${sysconfdir}"/rpstir \
    "${localstatedir}"/cache/rpstir \
    "${localstatedir}"/log/rpstir \
    "${localstatedir}"/lib/rpstir \
    ;
do
    mkdir -p "${d}"
    chmod -R o-rwx "${d}"
done
[ -f "${sysconfdir}"/rpstir/rpstir.conf ] \
    || cp "${docdir}"/examples/rpstir.conf "${sysconfdir}"/rpstir
# edit "${sysconfdir}"/rpstir/rpstir.conf as desired
rpstir-initialize -f

This ticket is about simplifying the installation procedure by doing something similar during make install (probably via the install utility).

• etc/rpstir.conf.in should be modified to use sensible defaults for all parameters except for DatabasePassword. DatabasePassword should be set by make install.
• configure.ac should be modified to:
  • take optional --with-user= and --with-group= parameters for the username and group name to use for the files that README currently says to chown
  • test for (but don't require) the presence of a pseudo-random number generating file (e.g., /dev/urandom)
• make install should be modified to:
  • When installing "${docdir}"/examples/rpstir.conf, set DatabasePassword to an example password.
  • Create the directories mentioned above and in the README. If the username and/or group were specified to configure, use those. Otherwise, use the current user/group.
  • If "${sysconfdir}"/rpstir/rpstir.conf does not exist, and a PRNG device is available, install etc/rpstir.conf.in to "${sysconfdir}"/rpstir/rpstir.conf and set DatabasePassword to a random password. (Note that this only makes sense in conjunction with [make initialize/upgrade safer, easier, and more powerful #20] and possibly also [automatic upgrade or init #21])
• README should be updated

Reported by: rhansen

Original Ticket: rpstir/tickets/16

[dseomn]

• Description has changed:

Diff:

--- old
+++ new
@@ -15,7 +15,14 @@
     # edit "${sysconfdir}"/rpstir/rpstir.conf as desired
     rpstir-initialize -f

-This ticket is about simplifying the installation procedure by doing the equivalent during `make install` (probably via the `install` utility), except for the last two lines:
+This ticket is about simplifying the installation procedure by doing something similar during `make install` (probably via the `install` utility).

-  * the user will need to edit `rpstir.conf`, but we can at least have sensible defaults that just work for 99% of users
-  * running `rpstir-initialize -f` is bad if the user is upgrading
+* `etc/rpstir.conf.in` should be modified to use sensible defaults for all parameters except for `DatabasePassword`. `DatabasePassword` should be set by `make install`.
+* `configure.ac` should be modified to:
+    * take optional `--with-user=` and `--with-group=` parameters
+    * test for (but don't require) the presence of a pseudo-random number generating file (e.g., `/dev/urandom`) 
+* `make install` should be modified to:
+    * When installing `"${docdir}"/examples/rpstir.conf`, set `DatabasePassword` to an example password.
+    * Create the directories mentioned above and in the `README`. If the username and/or group were specified to `configure`, use those. Otherwise, use the current user/group.
+    * If `"${sysconfdir}"/rpstir/rpstir.conf` does not exist, and a PRNG device is available, install `etc/rpstir.conf.in` to `"${sysconfdir}"/rpstir/rpstir.conf` and set `DatabasePassword` to a random password. (TODO: there should be another ticket about modifying everything that uses the database to attempt to initialize the database as needed.)
+* `README` should be updated

Original comment by: dseomn

[dseomn]

• Description has changed:

Diff:

--- old
+++ new
@@ -24,5 +24,5 @@
 * `make install` should be modified to:
     * When installing `"${docdir}"/examples/rpstir.conf`, set `DatabasePassword` to an example password.
     * Create the directories mentioned above and in the `README`. If the username and/or group were specified to `configure`, use those. Otherwise, use the current user/group.
-    * If `"${sysconfdir}"/rpstir/rpstir.conf` does not exist, and a PRNG device is available, install `etc/rpstir.conf.in` to `"${sysconfdir}"/rpstir/rpstir.conf` and set `DatabasePassword` to a random password. (TODO: there should be another ticket about modifying everything that uses the database to attempt to initialize the database as needed.)
+    * If `"${sysconfdir}"/rpstir/rpstir.conf` does not exist, and a PRNG device is available, install `etc/rpstir.conf.in` to `"${sysconfdir}"/rpstir/rpstir.conf` and set `DatabasePassword` to a random password. (Note that this only makes sense in conjunction with [#20] and possibly also [#21])
 * `README` should be updated

Original comment by: dseomn

[dseomn]

• Description has changed:

Diff:

--- old
+++ new
@@ -19,7 +19,7 @@

 * `etc/rpstir.conf.in` should be modified to use sensible defaults for all parameters except for `DatabasePassword`. `DatabasePassword` should be set by `make install`.
 * `configure.ac` should be modified to:
-    * take optional `--with-user=` and `--with-group=` parameters
+    * take optional `--with-user=` and `--with-group=` parameters for the username and group name to use for the files that `README` currently says to `chown`
     * test for (but don't require) the presence of a pseudo-random number generating file (e.g., `/dev/urandom`) 
 * `make install` should be modified to:
     * When installing `"${docdir}"/examples/rpstir.conf`, set `DatabasePassword` to an example password.

Original comment by: dseomn