Kaleido: Control SV Slider interval and visibility with Artisan command?

[BRod1562]

I'd like to have the SV slider move in 5 degree intervals rather than 1. I see how to configure the other sliders (Air, Drum, Burner) but SV seems to be handled differently. I'd also like to hide it after Charge as it's useless until next pre-heat.

I can hide/unhide it from the control menu but don't see any other way to change its behavoir.

Are there Artisan commands to do this?

[Terracotta-6]

Hide SV slider control Slider unchecked, customize Events button to set SV value

[Terracotta-6]

Request to add the SliderSv() Artisan Command, which controls the show/hide function of the Set Value (SV) slider in the PID control interface. That said, Your requirement is rather niche, so it may not be adopted by the official Artisan team.

[MAKOMO]

I just extended the slider() command to toggle visibility on addressing the SV Slider as 5. This will be part of the next Artisan release.

[BRod1562]

Amazing customer support!

To use an alarm to control it would one use the "Event Button" alarm type or would there be a direct way (either is fine since I can make the button invisible if I wish).

[MAKOMO]

Are you a customer (paying) or a user (just enjoying without contributing)? Take care!

[BRod1562]

User who contributes sometimes (just did a day or two ago!) should do more often.
Thought of subscribing but I only roast about 100 lbs/year and use a database I created to track my roasts and inventory and make labels.
I plan to contribute annually.

[BRod1562]

Thank you again. I have it working in Artisan 4.0. Is there a way to get the SV slider to move in 5 degree increments rather than 1? I see how to do it with Air & Burner, but SV is different.

…

________________________________ From: Marko Luther ***@***.***> Sent: Saturday, January 24, 2026 11:07 AM To: artisan-roaster-scope/artisan ***@***.***> Cc: BRod1562 ***@***.***>; Author ***@***.***> Subject: Re: [artisan-roaster-scope/artisan] Kaleido: Control SV Slider interval and visibility with Artisan command? (Discussion #2101) I just extended the slider() command to toggle visibility on addressing the SV Slider as 5. This will be part of the next Artisan release. Screenshot.2026-01-24.at.17.05.16.png (view on web)<https://github.com/user-attachments/assets/7c702c29-fa64-4fac-a26e-f0af11091324> — Reply to this email directly, view it on GitHub<#2101 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BJ6WBPBGTP47GNGWG2OQIKL4IOKCNAVCNFSM6AAAAACSWAWJYGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTKNJZGI2DIMY>. You are receiving this because you authored the thread.Message ID: ***@***.***>

[MAKOMO]

No

[BRod1562]

OK. Thanks anyway! I'm using alarms in the profile to set SV now.