Serial communication issue

[martin-vl]

Last week I received my Ventilation gateway v8.6. First I want to say that looks nice and a good design.
I only have issue with connecting the serial connection. When I activate both RF and Serial plugins the serial data is not received any more and there is a time out. While if I disable the RF plugin the serial plugins works fine.

Situation when Serial communication works fine:

Situation when Serial communication is not working:

When I remove the RF log I get the following messages:

17413721: [P156] DUCO FanSpeed: start read, eventid:4
17413721: [P156] DUCO FanSpeed: Start reading fanspeed
17413729: [P153] DUCO BOX SENSOR: start read, eventid:5
17413729: [P153] DUCO BOX SENSOR: Serial port in use, set flag to read data later.
17413739: WD   : Uptime 290 ConnectFailures 0 FreeMem 17416 WiFiStatus 3 ESPeasy internal wifi status: Conn. IP Init

17416871: [P156] DUCO FanSpeed: Serial reading timeout
17416871: [P156] DUCO FanSpeed: Stop reading from serial
17416872: [P153] DUCO BOX SENSOR: start read, eventid:5
17416872: [P153] DUCO BOX SENSOR: Start readBoxSensors5

17420028: [P153] DUCO BOX SENSOR: Serial reading timeout
17420028: [P153] DUCO BOX SENSOR: Stop reading from serial
17420032: [P151] DUCO SER GW: Start disableCoreLogLevel

17423187: [P151] DUCO SER GW: Serial reading timeout
17423187: [P151] DUCO SER GW: Stop reading from serial

17444940: WD   : Uptime 291 ConnectFailures 0 FreeMem 18376 WiFiStatus 3 ESPeasy internal wifi status: Conn. IP Init

Any idea how I can solve this issue?

[arnemauer]

Hi,

You need to select 8.3 and lower. Is it working with that setting?

[martin-vl]

Both plugins I set now on 8.3 and lower. It seems to work now. Thanks.

It is still strange, because I have version 8.6, but oke.
Thanks for your fast response.