Merge pull request #48 from jerryneedell/jerryn_power

Fix setting of the Power amplifiers when power boost is enabled

Author: dhalbert

adafruit_rfm69.py

@@ -86,6 +86,7 @@
 _REG_FRF_LSB = const(0x09)
 _REG_VERSION = const(0x10)
 _REG_PA_LEVEL = const(0x11)
+_REG_OCP = const(0x13)
 _REG_RX_BW = const(0x19)
 _REG_AFC_BW = const(0x1A)
 _REG_RSSI_VALUE = const(0x24)
@@ -110,6 +111,8 @@
 _TEST_PA1_BOOST = const(0x5D)
 _TEST_PA2_NORMAL = const(0x70)
 _TEST_PA2_BOOST = const(0x7C)
+_OCP_NORMAL = const(0x1A)
+_OCP_HIGH_POWER = const(0x0F)
 
 # The crystal oscillator frequency and frequency synthesizer step size.
 # See the datasheet for details of this calculation.
@@ -285,6 +288,7 @@ def __set__(self, obj: Optional["RFM69"], val: int) -> None:
     dio_0_mapping = _RegisterBits(_REG_DIO_MAPPING1, offset=6, bits=2)
 
     # pylint: disable=too-many-statements
+    # pylint: disable=too-many-arguments
     def __init__(  # pylint: disable=invalid-name
         self,
         spi: SPI,
@@ -316,9 +320,6 @@ def __init__(  # pylint: disable=invalid-name
         self._write_u8(_REG_FIFO_THRESH, 0b10001111)
         # Configure low beta off.
         self._write_u8(_REG_TEST_DAGC, 0x30)
-        # Disable boost.
-        self._write_u8(_REG_TEST_PA1, _TEST_PA1_NORMAL)
-        self._write_u8(_REG_TEST_PA2, _TEST_PA2_NORMAL)
         # Set the syncronization word.
         self.sync_word = sync_word
         self.preamble_length = preamble_length  # Set the preamble length.
@@ -448,16 +449,17 @@ def reset(self) -> None:
         self._reset.value = False
         time.sleep(0.005)  # 5 ms
 
-    def set_boost(self, setting: int) -> None:
-        """Set preamp boost if needed."""
-        if self._tx_power >= 18:
-            self._write_u8(_REG_TEST_PA1, setting)
-            self._write_u8(_REG_TEST_PA2, setting)
+    def disable_boost(self) -> None:
+        """Disable preamp boost."""
+        if self.high_power:
+            self._write_u8(_REG_TEST_PA1, _TEST_PA1_NORMAL)
+            self._write_u8(_REG_TEST_PA2, _TEST_PA2_NORMAL)
+            self._write_u8(_REG_OCP, _OCP_NORMAL)
 
     def idle(self) -> None:
         """Enter idle standby mode (switching off high power amplifiers if necessary)."""
         # Like RadioHead library, turn off high power boost if enabled.
-        self.set_boost(_TEST_PA1_NORMAL)
+        self.disable_boost()
         self.operation_mode = STANDBY_MODE
 
     def sleep(self) -> None:
@@ -469,7 +471,7 @@ def listen(self) -> None:
         and retrieve packets as they're available.
         """
         # Like RadioHead library, turn off high power boost if enabled.
-        self.set_boost(_TEST_PA1_NORMAL)
+        self.disable_boost()
         # Enable payload ready interrupt for D0 line.
         self.dio_0_mapping = 0b01
         # Enter RX mode (will clear FIFO!).
@@ -480,8 +482,11 @@ def transmit(self) -> None:
         entering transmit mode and more.  For generating and transmitting a packet of data use
         :py:func:`send` instead.
         """
-        # Like RadioHead library, turn on high power boost if enabled.
-        self.set_boost(_TEST_PA1_BOOST)
+        # Like RadioHead library, turn on high power boost if needed.
+        if self.high_power and (self._tx_power >= 18):
+            self._write_u8(_REG_TEST_PA1, _TEST_PA1_BOOST)
+            self._write_u8(_REG_TEST_PA2, _TEST_PA2_BOOST)
+            self._write_u8(_REG_OCP, _OCP_HIGH_POWER)
         # Enable packet sent interrupt for D0 line.
         self.dio_0_mapping = 0b00
         # Enter TX mode (will clear FIFO!).
@@ -653,10 +658,10 @@ def tx_power(self) -> int:
         if not pa0 and pa1 and not pa2:
             # -2 to 13 dBm range
             return -18 + current_output_power
-        if not pa0 and pa1 and pa2 and not self.high_power:
+        if not pa0 and pa1 and pa2 and self.high_power and self._tx_power < 18:
             # 2 to 17 dBm range
             return -14 + current_output_power
-        if not pa0 and pa1 and pa2 and self.high_power:
+        if not pa0 and pa1 and pa2 and self.high_power and self._tx_power >= 18:
             # 5 to 20 dBm range
             return -11 + current_output_power
         raise RuntimeError("Power amps state unknown!")