New Board YS-SXT-V4.2 based on RDI32EBK01

[boriskroeger]

Hello RodoDurden,

in my second hoverboard I found PCBs with an unknown MCU RDI32EBK01NTDO2F3A2218.
I was unable to find any information for this MCU.
Any ideas what generation this board could be? Or might it be a new (not yet known) one?

regards

Boris

PCB A Front

PCB A Back

PCB B Front

PCB B Back

[RoboDurden]

Without a Keil package there is no chance for support.
But the MCU might be pin compatible, so you might be able to replace it with a gd32f130

[boriskroeger]

If the MCU swap is not working, which board would you recommend that is best supported?

[RoboDurden]

Gen1 with 103 MCU and eferu foc Firmware.
But my gen2.x is catching up.

The mm32 firmware from AiLife is also nice.

For gen2.x the gd32f130c8 is most common. Less trouble.

[omarmahamed346-art]

I have this same board with the MM32spin06pf and need help with pin tracing for v4.2

[RoboDurden]

https://www.care.org.au/media/media-releases/one-person-dying-of-hunger-every-four-seconds/

They also need help.