Hi
I have had an ESP32 6 channel board with 1 expandable board for some time & they have worked great. Lately the CT1 input on the main board will sit on 95 to 105watts no matter what the current draw is. If I unplug the CT for a while & then plug it back in it will read correctly for a few days & then revert to 100ish watts again. I have tried 2 different new 100A YHDC SCT-013 ct clamps but this didn’t help either. Do you have any thoughts or comments on what the issue may be. Thanks in advance.
Cheers
Mick Allen
Hi
I have had an ESP32 6 channel board with 1 expandable board for some time & they have worked great. Lately the CT1 input on the main board will sit on 95 to 105watts no matter what the current draw is. If I unplug the CT for a while & then plug it back in it will read correctly for a few days & then revert to 100ish watts again. I have tried 2 different new 100A YHDC SCT-013 ct clamps but this didn’t help either. Do you have any thoughts or comments on what the issue may be. Thanks in advance.
Cheers
Mick Allen