Skip to content

README.md

Latest commit

 

History

History
63 lines (42 loc) · 2.74 KB

README.md

File metadata and controls

63 lines (42 loc) · 2.74 KB
Raw

incompressibleCVoF

OpenFOAM solver based upon incompressibleVoF utilizing an added scalar field C for modelling concentration.

Solver architecture (older OpenFOAM version):
Albert S. Kim

Adapted concentration-dependent surface tension with ideas from:
Zimbrod et al.

Prerequisites

  • OpenFOAM-12 (from OpenFOAM.org)
  • basic C++ toolchain (compatible for OpenFOAM)

Tested for compilation under Linux, Ubuntu 22.04 and 24.04

Building

  • Clone the repo
  • Standard OpenFOAM compilation invoke
wmake

The library will be installed into the users OpenFOAM library directory FOAM_USER_LIBBIN

Utilization

The standard setup for incompressibleVoF is needed. Therefore any two-phase model can be used. An added concentration field is needed inside the time-directory (standard /0).

The concentration field C models an arbitrary concentration of dilute inside all phases. To accommodate the phase transition from A to B, Henry's Law defines the concentration jump at the boundary.

Henry's constant (dimension-les) is defined as:
$H=\frac{c_{alpha}}{c_{1-alpha}}$
Where $alpha$ is the main defined and modelled phase (from the two-phase approach). $1-\alpha$ is the remaining phase inside the modelled domain.

Besides the concentration field an additional dictionary diluteDiffusionProperties inside /constant is needed where all necessary constants for the concentration modelling are defined.

  • Henry's constant as H
  • phase-averaged diffusion constant DC $[m^2/s]$

Adapted from the ideas of Zimbrod et al. an concentration dependent surface tension model is also included in the solver. Inside phaseProperties the surface tension can be modelled as concentrationDependent. With this setting the surface tension can be modelled with Funtion1 support from OpenFOAM. A polynomial function with the concentration as argument can therefore be used to model the surface tension. This allows the implementation of effects such as the Marangoni-effect.

Test-cases utilizing the solver are located inside /test_cases

References

Zimbrod, P., Schreter, M., & Schilp, J. (2022). Efficient Simulation of Complex Capillary Effects in Advanced Manufacturing Processes using the Finite Volume Method. 2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME), 1–6. https://doi.org/10.1109/ICECCME55909.2022.9988504

Irvine, J. L., & Kim, A. S. (2019). Coupled transport phenomena of a bioswale process during storm runoff events: A CFD study using OpenFOAM. DESALINATION AND WATER TREATMENT, 140, 103–117. https://doi.org/10.5004/dwt.2019.23459